Arduino Pro Mini (Deek-Robot)

This product is currently sold out.

It’s blue! It’s thin! It’s the Deek-Robot Pro Mini! This is a 5V Arduino running the 16MHz bootloader. The Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. It also does not come with the bootloader installed.

The Pro Mini is functionally identical to the extremely popular and easy-to-use open source Arduino Pro Mini. It has 12 digital input/output pins (five of them can be used as a PWM output), 8 analog inputs, a 16 MHZ resonator and a reset button.

There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin and not VCC.

This package comes with comes with 3 strips of male header pins.

Features: 

  • Microcontroller: ATmega328 running at 16MHz with external resonator (0.5% tolerance)
  • Clock Speed: 16 MHz
  • Operating Voltage: 5V
  • Input Voltage (recommended): 5-12V
  • Digital I/O Pins: 14 (6 capable as PWN outputs)
  • Analog Input Pins: 8
  • Max 150mA output
  • Overcurrent protected
  • Reverse polarity protected
  • Flash Memory 32KB
  • SRAM: 2 KB
  • EEPROM: 1 KB
  • Dimension (mm): 33 x 18 x 6

Programming

Note: Requires an FTDI adapter to program the Pro Mini.

You will need to install the bootloader first. Instructions for loading the bootloader can be found at http://shop.makersmojo.biz/blogs/news/16435055-bootloading-an-arudino-pro-mini.

The Arduino software (available from www.arduino.cc) is great for programming these.

Warranty and Support:

We programme and use all our products in our projects so are able to offer technical support and documentation.

We provide a warranty for any defects in manufacturing.

Related Products